PORT / HOSE
Festool 36 mm (D36) tool port dust port size
The measured dimensions of the Festool 36 mm (D36) tool port and the hose sizes it mates with.
OD44 mm1-3/4 in, 44 mm
Rings drawn to scale from the measured diameters in the table below.
Measured port dimensions
| Port type | male spigot (hose goes over it) |
|---|---|
| Outer diameter (OD) | 1-3/4 in, 44 mm |
| Manufacturer designation | 36 mm nominal, hose tip 38 mm ID / 44 mm OD |
Shop notes
Found on: Festool track saws, larger routers and any tool run on the higher-flow D36 hose.
The D36 hose tool end measures roughly 38 mm ID and 44 mm OD. It is the higher-airflow Festool line and needs the DC-D 36/27 reducing sleeve to drop onto a 27 mm tool.
Connect this port
- Connect to Festool 27 mm (D27) tool portneeds a reducer
- Connect to 2-1/2 in shop-vac hoseneeds a reducer
- Connect to 1-1/4 in shop-vac hoseneeds a reducer
- Connect to 1-7/8 in shop-vac hoseneeds a reducer
- Connect to 2-1/2 in Ridgid / Craftsman locking hoseneeds a reducer
- Connect to 4 in dust-collector hosenot compatible