Connect a DeWalt random-orbit sander stepped port to a DeWalt DWV012 32 mm hose
How to join a DeWalt random-orbit sander stepped port to a DeWalt DWV012 32 mm hose, and what stops it leaking dust.
Not a direct fit. Joining the DeWalt random-orbit sander stepped port to a DeWalt DWV012 32 mm hose needs a 26 / 32 / 35 mm to 32 mm step reducer.
Rings drawn to scale from the measured diameters in the table below.
The two ends
| End A | DeWalt random-orbit sander stepped port (1-3/8 in OD, 35 mm OD) |
|---|---|
| End B | DeWalt DWV012 32 mm hose (1-1/4 in ID) |
| Fit type | male port into hose cuff |
| Reducer needed | 26 / 32 / 35 mm to 32 mm step reducer |
Shop notes
Measured across the joint between the DeWalt random-orbit sander stepped port and the DeWalt DWV012 32 mm hose, the port (35 mm) is 3 mm larger than the hose (32 mm), so it will not seat. A 26 / 32 / 35 mm to 32 mm step reducer closes that 3 mm step so the two hold together instead of leaking at the gap.
A 3 mm mismatch feels close enough to force, and it will hold for a minute before it works loose under airflow. Fit the step ring rather than trusting friction on a gap this size.
The reducer to buy
Shop 26 / 32 / 35 mm to 32 mm step reducer on AmazonaffiliateFind 26 / 32 / 35 mm to 32 mm step reducer on eBayaffiliateRelated connections
- DeWalt random-orbit sander stepped portstepped 26 / 32 / 35 mm
- DeWalt DWV012 32 mm hose32 mm (1-1/4 in)
- DeWalt random-orbit sander stepped port to 35 mm EU power-tool port (DeWalt / Bosch / Makita)direct fit
- DeWalt random-orbit sander stepped port to 1-1/4 in shop-vac hoseneeds a reducer
- DeWalt DWS779 / DWS780 miter saw port to DeWalt DWV012 32 mm hoseneeds a reducer
- DeWalt miter saw dust elbow (1-1/2 in outer) to DeWalt DWV012 32 mm hoseneeds a reducer