PORT / HOSE
Kreg 720 Pro pocket-hole jig port dust port size
The measured dimensions of the Kreg 720 Pro pocket-hole jig port and the hose sizes it mates with.
ID27 mm1-1/16 in, 27 mm
Rings drawn to scale from the measured diameters in the table below.
Measured port dimensions
| Port type | female socket (hose goes into it) |
|---|---|
| Inner diameter (ID) | 1-1/16 in, 27 mm |
| Manufacturer designation | takes a 27 mm hose tip |
Shop notes
Found on: Kreg 720 and 720 Pro pocket-hole jigs.
The Kreg 720 Pro dust port accepts a 27 mm hose tip, which is why a Festool D27 hose end plugs straight into it. For a shop vac, a printed or moulded step from 27 mm up to a 1-1/4 in cuff is the usual join.
Connect this port
- Connect to 1-1/4 in shop-vac hoseneeds a reducer
- Connect to 1-7/8 in shop-vac hoseneeds a reducer
- Connect to 2-1/2 in shop-vac hosenot compatible
- Connect to 2-1/2 in Ridgid / Craftsman locking hosenot compatible
- Connect to 4 in dust-collector hosenot compatible
- Connect to Festool D27 antistatic hoseneeds a reducer