PORT / HOSE
Benchtop jointer 2-1/4 in port dust port size
The measured dimensions of the Benchtop jointer 2-1/4 in port and the hose sizes it mates with.
OD57 mm2-1/4 in, 57 mm
Rings drawn to scale from the measured diameters in the table below.
Measured port dimensions
| Port type | male spigot (hose goes over it) |
|---|---|
| Outer diameter (OD) | 2-1/4 in, 57 mm |
| Manufacturer designation | 2-1/4 in OD (approx 57 mm) |
Shop notes
Found on: Delta and similar 6 in benchtop jointers with a rectangular hood necking to a round port.
A benchtop jointer commonly necks its rectangular chip hood down to a 2-1/4 in outer-diameter round port. A 2-1/2 in shop-vac cuff slips over it, though a larger 4 in collector moves the volume of shavings a jointer throws far better.
Connect this port
- Connect to 1-1/4 in shop-vac hoseneeds a reducer
- Connect to 1-7/8 in shop-vac hoseneeds a reducer
- Connect to 2-1/2 in shop-vac hosedirect fit
- Connect to 2-1/2 in Ridgid / Craftsman locking hosedirect fit
- Connect to 4 in dust-collector hosenot compatible
- Router table fence portrelated size (2-1/2 in ID, 2-11/16 in OD)