Connect a Bosch GTS1031 table saw port to a DeWalt DWV012 32 mm hose
How to join a Bosch GTS1031 table saw port to a DeWalt DWV012 32 mm hose, and what stops it leaking dust.
Not a direct fit. Joining the Bosch GTS1031 table saw port to a DeWalt DWV012 32 mm hose needs a 2 in to 32 mm step reducer.
Rings drawn to scale from the measured diameters in the table below.
The two ends
| End A | Bosch GTS1031 table saw port (2 in OD, 51 mm OD) |
|---|---|
| End B | DeWalt DWV012 32 mm hose (1-1/4 in ID) |
| Fit type | male port into hose cuff |
| Reducer needed | 2 in to 32 mm step reducer |
Shop notes
Measured across the joint between the Bosch GTS1031 table saw port and the DeWalt DWV012 32 mm hose, the port (51 mm) is 19 mm larger than the hose (32 mm), so it will not seat. A 2 in to 32 mm step reducer closes that 19 mm step so the two hold together instead of leaking at the gap.
A 19 mm mismatch feels close enough to force, and it will hold for a minute before it works loose under airflow. Fit the step ring rather than trusting friction on a gap this size.
The reducer to buy
Shop 2 in to 32 mm step reducer on AmazonaffiliateFind 2 in to 32 mm step reducer on eBayaffiliateRelated connections
- Bosch GTS1031 table saw port2 in dust port
- DeWalt DWV012 32 mm hose32 mm (1-1/4 in)
- DeWalt DWS779 / DWS780 miter saw port to DeWalt DWV012 32 mm hoseneeds a reducer
- DeWalt miter saw dust elbow (1-1/2 in outer) to DeWalt DWV012 32 mm hoseneeds a reducer
- DeWalt random-orbit sander stepped port to DeWalt DWV012 32 mm hoseneeds a reducer
- 35 mm EU power-tool port (DeWalt / Bosch / Makita) to DeWalt DWV012 32 mm hoseneeds a reducer