PortMatchMatch any tool dust port to any shop-vac or collector hose, with the exact reducer

Makita SP6000 track saw port: measured hose 27 mm ID / 36 mm OD tool end. What shop-vac hose fits it and the exact reducer to join it to a 1-1/4, 2-1/2 or 4 inch hose.

Updated 05 September 2026.

PORT / HOSE

Makita SP6000 track saw port dust port size

The measured dimensions of the Makita SP6000 track saw port and the hose sizes it mates with.

OD36 mm1-7/16 in, 36 mm

Rings drawn to scale from the measured diameters in the table below.

Measured port dimensions

Port typemale spigot (hose goes over it)
Outer diameter (OD)1-7/16 in, 36 mm
Manufacturer designationhose 27 mm ID / 36 mm OD tool end
Mating diameter (mm)36

Shop notes

Found on: Makita SP6000 and SP001G plunge track saws.

The SP6000 runs the Makita 27/36 mm anti-static hose, 27 mm at the bore and about 36 mm at the tool end. That 36 mm outer is close to the Festool D36 tip, so Makita and Festool track-saw hoses often interchange.

Connect this port

Questions and answers

What is the port type of the Makita SP6000 track saw port dust port size?

male spigot (hose goes over it)

What is the outer diameter (od) of the Makita SP6000 track saw port dust port size?

1-7/16 in, 36 mm

What is the manufacturer designation of the Makita SP6000 track saw port dust port size?

hose 27 mm ID / 36 mm OD tool end

What is the mating diameter (mm) of the Makita SP6000 track saw port dust port size?

36